Before initiating pairing, you will need to ensure that Bluetooth® is enabled on your mobile device and that you have an internet connection. Tap on either iOS or Android below for a guide on how to do this for each operating system.
1. Go to the Settings menu on your mobile device. On the Settings list, tap Bluetooth® to open the Bluetooth®
2. Toggle the Bluetooth switch to the right to enable it.
3. Enable Wi-Fi or Mobile data to be able to connect to the Hailie™ server when you are pairing your sensor.
1. Ensure Bluetooth® is enabled on your phone or tablet computer. Go to the Settings menu on your phone. Tap Connected devices to access the Bluetooth® settings.
2. Toggle the Bluetooth® switch to the right to enable it.
3. Return to the Settings menu and tap Network & Internet. Enable Wi-Fi or Mobile data to be able to connect to the Hailie™ server when you are pairing your sensor.
Pairing Instructions
Be aware that the pairing process may differ slightly depending on the type of Hailie™ sensor and the compatible mobile device you are using. Look for the sensor shape below that most closely resembles your Hailie™ sensor and tap on it to see the pairing instructions.
 |
For the latest reviewed compatible Inhalers table, refer to adherium.com/compatibility |
1. Open the Hailie™ app and navigate to the Inhalers screen. Tap the '+' symbol in the top right corner of the screen and select Add sensor to access the pairing menu.
2. Select the shape that most closely resembles your Hailie™ sensor.
3. The Hailie™ app helps you to prepare the Hailie™ sensor before pairing is initiated. The Hailie™ app navigates you through the following instructions:
- Wake up
- Attaching the Sensor
- Battery Level
- Pairing Instructions
4. On the Hailie™ sensor, hold down the Pair Button for 1 second to enter pairing mode. The Pair LED will flash blue when the Hailie™ sensor is in pairing mode. The Pair LED will flash green to indicate successful pairing.
|
If the pairing is not successful within 60 seconds the LED flashes red. The pairing process can be repeated if necessary. |
|
The Hailie™ sensor can only be paired with a single mobile device at one time. Successful pairing with a new mobile device removes the current pairing. If pairing on the new mobile device fails, the existing pairing will be retained. |
|
For the latest reviewed compatible Inhalers table, refer to adherium.com/compatibility. |
1. Open the Hailie™ app and navigate to the Inhalers screen. Tap the '+' symbol in the top right corner of the screen and select Add sensor to access the pairing menu.
2. Select the shape that most closely resembles your Hailie™ sensor.
3. The Hailie™ app helps you to prepare the Hailie™ sensor before pairing is initiated. The Hailie™ app navigates you through the following instructions:
- Sensor type
- Wake up
- Battery Level
- Attaching the Sensor
- Pairing Instructions
4. On the Hailie™ sensor, press the Status Button 3 times quickly to enter pairing mode. The LED will flash blue when the Hailie™ sensor is in pairing mode. The LED will flash green to indicate successful pairing.
 |
If the pairing is not successful within 60 seconds the LED flashes red. The pairing process can be repeated if necessary. |
|
The Hailie™ sensor can only be paired with a single phone or tablet computer at one time. Successful pairing with a new phone or tablet computer removes the current pairing. If pairing on the new phone or tablet computer fails, the existing pairing will be retained. |
|
For the latest reviewed compatible Inhalers table, refer to adherium.com/compatibility. |
1. Open the Hailie™ app and navigate to the Inhalers screen. Tap the '+' symbol in the top right corner of the screen and select Add sensor to access the pairing menu.
2. Select the shape that most closely resembles your Hailie™ sensor.
3. The Hailie™ app helps you to prepare the Hailie™ sensor before pairing is initiated. The Hailie™ app navigates you through the following instructions:
- Wake up
- Battery Level
- Attaching the Sensor
- Pairing Instructions
4. On the Hailie™ sensor, hold down the Pair Button for 1 second to enter pairing mode. The Pair LED will flash blue when the Hailie™ sensor is in pairing mode. The Pair LED will flash green to indicate successful pairing.
|
If the pairing is not successful within 60 seconds the LED flashes red. The pairing process can be repeated if necessary. |
|
The Hailie™ sensor can only be paired with a single phone or tablet computer at one time. Successful pairing with a new phone or tablet computer removes the current pairing. If pairing on the new phone or tablet computer fails, the existing pairing will be retained. |
|
For the latest reviewed compatible Inhalers table, refer to adherium.com/compatibility. |
1. Open the Hailie™ app and navigate to the Inhalers screen. Tap the '+' symbol in the top right corner of the screen and select Add sensor to access the pairing menu.
2. Select the shape that most closely resembles your Hailie™ sensor.
3. The Hailie™ app helps you to prepare the Hailie™ sensor before pairing is initiated. The Hailie™ app navigates you through the following instructions:
- Wake up
- Battery Level
- Attaching the Sensor
- Pairing Instructions
4. On the Hailie™ sensor press the Status Button 3 times quickly to enter pairing mode. The LEDs will flash blue when the Hailie™ sensor is in pairing mode. The LEDs will flash green to indicate successful pairing.
|
If the pairing is not successful within 60 seconds the LED flashes red. The pairing process can be repeated if necessary. |
|
The Hailie™ sensor can only be paired with a single phone or tablet computer at one time. Successful pairing with a new phone or tablet computer removes the current pairing. If pairing on the new phone or tablet computer fails, the existing pairing will be retained. |
|
For the latest reviewed compatible Inhalers table, refer to adherium.com/compatibility. |
1. Open the Hailie™ app and navigate to the Inhalers screen. Tap the '+' symbol in the top right corner of the screen and select Add sensor to access the pairing menu.
2. Select the shape that most closely resembles your Hailie™ sensor.
3. The Hailie™ app helps you to prepare the Hailie™ sensor before pairing is initiated. The Hailie™ app navigates you through the following instructions:
- Attach Inhaler
- Wake up
- Battery Level
- Pairing Instructions
4. On the Hailie™ sensor, hold down the Pair Button for 1 second to enter pairing mode. The Pair LED will flash blue when the Hailie™ sensor is in pairing mode. The Pair LED will flash green to indicate successful pairing.
|
If the pairing is not successful within 60 seconds the LED flashes red. The pairing process can be repeated if necessary. |
|
The Hailie™ sensor can only be paired with a single phone or tablet computer at one time. Successful pairing with a new phone or tablet computer removes the current pairing. If pairing on the new phone or tablet computer fails, the existing pairing will be retained. |
|
For the latest reviewed compatible Inhalers table, refer to adherium.com/compatibility. |
1. Open the Hailie™ app and navigate to the Inhalers screen. Tap the '+' symbol in the top right corner of the screen and select Add sensor to access the pairing menu.
2. Select the shape that most closely resembles your Hailie™ sensor.
3. The Hailie™ app helps you to prepare the Hailie™ sensor before pairing. The Hailie™ app navigates you through the following instructions:
- Attach Inhaler
- Wake up
- Battery Level
- Pairing Instructions
4. On the SmartTurbo™, press the Status Button 3 times quickly to enter pairing mode. The LED will flash blue when the SmartTurbo™ is in pairing mode. The LED will flash green to indicate successful pairing.
|
If the pairing is not successful within 60 seconds the LED flashes red. The pairing process can be repeated if necessary. |
|
The Hailie™ sensor can only be paired with a single phone or tablet computer at one time. Successful pairing with a new phone or tablet computer removes the current pairing. If pairing on the new phone or tablet computer fails, the existing pairing will be retained. |
The Hailie™ app will advise you if the pairing has been successful or unsuccessful. If pairing is unsuccessful, please follow the Hailie™ app instructions and try pairing again.
If the serial number of your Hailie™ sensor does appear in the Setup list when you search on the Hailie™ app, try to Forget This Device in your mobile device Settings menu before attempting to pair the sensor again.
Comments
Article is closed for comments.