How do I manually pair a sensor?

A Hailie® Smartinhaler® sensor can be paired from the Inhalers tab within the Hailie® Smartinhaler® app:

1. Open the app and tap the Inhalers tab.
2. Tap the unpaired sensor (greyed out) > tap Pair this sensor.
3. Activate pairing mode on the sensor. Make sure the sensor LED is flashing blue. Pairing mode lasts up to 60 seconds.
4. Go to the app and tap Pair Now.
5. Select any on screen notifications to pair if displayed.
6. The sensor LED will flash green when paired or red if unsuccessful.
7. Repeat the above steps if pairing was unsuccessful.
8. Select the + to add more sensors if required, following the in-app prompts.

Activate pairing mode.

One buttons sensors:

• 3 short presses of the sensor status button. The LED will flash blue for 60 seconds.  Repeat this if the sensor did not pair.

Three button sensors:

• 1 press of the sensor pair button until the LED flashes blue. The LED will flash blue for 60 seconds. Repeat this if the sensor did not pair.